Replacing your old toilet with a brand new one is not that hard as you may think. Well, if you hadn’t replaced that old worn out toilet since the late 90s when you came to your house, then it’s a good time to buy a new one and replace it using some simple DIY techniques. Click Here to check best toilet reviews on our website and choose the one which fulfill your needs.
Here is a simple guide that tells you how to replace your toilet. Follow the steps mentioned below and you won’t need a plumber do this job.
How to Replace a Toilet
- Firstly turn off the main water supply to your toilet.
- I recommend wearing the rubber gloves. You don’t want to get your hands in the mess!
- Now remove the top lid from the water tank. Just pull it with a little force and it will come off easily.
- After that, you have to remove the refill tube from the overflow pipe and drain the tank. If there is still water left inside, use a sponge to get rid of it.
- Using an adjustable wrench, disconnect the main water supply line.
- Next, you have to disconnect the flapper chain as well and then unscrew the bolts that are attached to the tank. These are underneath the seat of the toilet.
- Safely pull up the toilet from the bowl and also remove the caps sitting on the bolts.
- Once again use your wrench and unscrew the nuts.
- Grab the bowl with both the hands and give it a gentle shake to loosen its grip on the floor and place it on a toilet or a piece of cardboard.
- Now comes the messy part. Remove the old wax ring that will be full of debris on it and clean the floor around the drainage hole.
- If you think that the bolts are rusty, replace them else use the old ones.
- Buy a new wax ring and carefully position it on the top of the drainage hole.
- Grab your new toilet and rock it until it sits in level with the floor. Don’t put too much of force or shake it a lot; it may get damaged.
- Now assemble the new water tank on the top and tighten it with the bolts. It will have other items in it; you just need to attach the water pipe with the supply line using the adjustable wrench.
- Finally, turn on the water supply, checks if the new toilet is fine and doesn’t leak. Flush it a couple of times and if possible use a toilet detergent before using it.
- Dispose of the old toilet and water tank carefully or transport it to the nearest garbage hump.
That’s all. You have successfully replaced your toilet. All you need to do now is maintain a proper hygiene by cleaning your toilet regularly with a nice toilet detergent. Flush out after ever use and once in a month use a plunger to ensure that it doesn’t clog.
Looking for the best toilets in the market? Click here to check out.